The course is aimed at university-level students of all engineering backgrounds, who would like to learn the basics of modern biomedical engineering, including the development of human-robotic interfaces and systems such as bionic prosthetics. The course is covering the practical basics of almost everything that a modern biomedical engineer is required to know: electronics, control theory, microcontrollers (Arduino), and high-level programming (MATLAB). All covered disciplines do not require any prior knowledge except university-level mathematics and physics. By the end of the course, the students will be able to practically understand and design electronic systems for electrophysiological signal acquisition, connect and program the microcontroller, organise the data transmission between a controller and PC, process the acquired signal and control a simple robot with the acquired signal in real-time. The course is also providing a platform from which the students can improve their skills further by simply adding more complicated systems and experimenting with more advanced control paradigms. Although the course is aimed at engineers, it will be also suitable for anyone who is interested in modern R&D as it teaches the practical concepts which are employed by almost any engineering environments around the world involved in designing and prototyping of new ideas, both in academia and industry. The course was developed by Peter the Great St. Petersburg Polytechnic University with the support of University College London (UCL).

Content is an eminent example of the features that contributed to the success of wireless Internet. Mobile platforms such as the Snapdragon™ processor have special hardware and software capabilities to make acquisition, processing and rendering of multimedia content efficient and cost-effective. In this course, you will learn the principles of video and audio codecs used for media content in iTunes, Google Play, YouTube, Netflix, etc. You will learn the file formats and codec settings for optimizing quality and media bandwidth and apply them in developing a basic media player application. Learning Goals: After completing this course, you will be able to: 1. Explain the tradeoffs between media quality and bandwidth for content delivery. 2. Extract and display metadata from media files. 3. Implement and demonstrate a simple media player application using DragonBoard™ 410c.

Hi, this is a course series I started to help various colleagues in the world of electrical engineering and industrial automation to understand and to be able to design and implement a most common motor starter for industrial automation applications - DOL motor starter. Since this is a first course in the series, I start of not only by building a whole circuit diagram but also explaining in detail all the circuit components, both for power and control circuit. You'll also learn how to properly dimension (size) all the power circuit components. In the following courses we will more concentrate on the control circuit since after this course you will understand: the symbols (IEC/NFPA) the power circuit components such as fuse, contactor, motor overload switch aka motor protection circuit breaker (MPCB) the control circuit components such as START/STOP pushbuttons, emergency stop pushbutton, signal lamps (aka pilot lights), relay and it's role etc. Regarding manual controls, that is, pilot devices, I will also publish soon 2 courses (one for Siemens devices and one for Allen Bradley) that will teach you how to efficiently plan those pilot devices such as START/STOP push buttons, emergency stop push button, selector switch (MAN-O-AUTO), twin push button, pilot lights (signal lamps). So please refer to those respective courses if you want to learn in detail how to configure those devices which tend to get complicated since they normally constitute from many different parts/pieces which if properly configured then form a whole working component. Hope you will enjoy the course and I'll be seeing you in the lectures. Stay safe and well. Best regards, Ivan Vidovic

This course can also be taken for academic credit as ECEA 5340, part of CU Boulder’s Master of Science in Electrical Engineering degree. After taking this course, you will be able to: ● Understand how to specify the proper thermal, flow, or rotary sensor for taking real-time process data. ● Implement thermal sensors into an embedded system in both hardware and software. ● Add the sensor and sensor interface into a microprocessor based development kit. ● Create hardware and firmware to process sensor signals and feed data to a microprocessor for further evaluation. ● Study sensor signal noise and apply proper hardware techniques to reduce it to acceptable levels. You will need to buy the following components to do the two course projects based on the videos in this module. Note that if you have already purchased the PSOC 5LP PROTOTYPING KIT, you do not need to buy it again. These parts may be purchased off the Digikey web site, www. Digikey.com. Or, you may obtain the specs from the site, and purchase them elsewhere. These are the part numbers typed out, so you can copy and paste them into the Digikey web site. You will need one of each part. 428-3390-ND NHD-0216BZ-RN-YBW-ND 570-1229-ND A105970CT-ND Additional equipment needed: • Wire - various gauges and lengths • Breadboard • Oscilloscope – suggested models are: o PICOSCOPE 2204A-D2 available on www.digikey.com or o Digilent 410-324 | OpenScope MZ available on www.newark.com Depending on your budget, you can also investigate these models: o Hantek HT6022BE20MHz - https://www.amazon.com/dp/B009H4AYII o SainSmart DSO212 - https://www.amazon.com/dp/B074QBQNB7 o PoScope Mega50 USB - https://www.robotshop.com/en/poscope-mega50-usb-mso-oscilloscope.html o ADALM2000 - https://www.digikey.com/en/products/detail/analog-devices-inc./ADALM2000/7019661

This course Electric Motor Control explain the fundamental concepts of designing and maintaining electrical control for the three phase induction motors. Design simple and complex control circuits. all circuits discussed in this course are practical. first section electrical control and protective devices is about fundamental components of motor controls, devices that control the flow of current in circuits. circuit breakers , fuse , relays , switches , contactor and timers. second section is about sizing electric motor panels. third section is about electric control circuits.

In this course students learn the basic concepts of acoustics and electronics and how they can applied to understand musical sound and make music with electronic instruments. Topics include: sound waves, musical sound, basic electronics, and applications of these basic principles in amplifiers and speaker design.

Welcome to the Introduction to Embedded Systems Software and Development Environments. This course is focused on giving you real world coding experience and hands on project work with ARM based Microcontrollers. You will learn how to implement software configuration management and develop embedded software applications. Course assignments include creating a build system using the GNU Toolchain GCC, using Git version control, and developing software in Linux on a Virtual Machine. The course concludes with a project where you will create your own build system and firmware that can manipulate memory. The second course in this 2 course series , Embedded Software and Hardware Architecture, will use hardware tools to program and debug microcontrollers with bare-metal firmware. Using a Texas Instruments MSP432 Development Kit, you will configure a variety of peripherals, write numerous programs, and see your work execute on your own embedded platform!

This course can also be taken for academic credit as ECEA 5731, part of CU Boulder’s Master of Science in Electrical Engineering degree. In this course, you will learn the purpose of each component in an equivalent-circuit model of a lithium-ion battery cell, how to determine their parameter values from lab-test data, and how to use them to simulate cell behaviors under different load profiles. By the end of the course, you will be able to: - State the purpose for each component in an equivalent-circuit model - Compute approximate parameter values for a circuit model using data from a simple lab test - Determine coulombic efficiency of a cell from lab-test data - Use provided Octave/MATLAB script to compute open-circuit-voltage relationship for a cell from lab-test data - Use provided Octave/MATLAB script to compute optimized values for dynamic parameters in model - Simulate an electric vehicle to yield estimates of range and to specify drivetrain components - Simulate battery packs to understand and predict behaviors when there is cell-to-cell variation in parameter values

"Introduction to Systems Engineering" uses a structured yet flexible approach to provide a holistic, solid foundation to the successful development of complicated systems. The course takes you step by step through the system life cycle, from design to development, production and management. You will learn how the different components of a system interrelate, and how each contributes to a project’s goals and success. The discipline’s terminology, which can so often confuse the newcomer, is presented in an easily digestible form. Weekly video lectures introduce and synthesise key concepts, which are then reinforced with quizzes and practical exercises to help you measure your learning. This course welcomes anyone who wants to find out how complex systems can be developed and implemented successfully. It is relevant to anyone in project management, engineering, QA, logistic support, operations, management, maintenance and other work areas. No specific background is required, and we welcome learners with all levels of interest and experience.

Plastic electronics is a concept that emerged forty years ago, with the discovery of electrically conductive polymers. Ten years later, the first electronic devices using organic solids in place of the ubiquitous inorganic semiconductors were realised. The best achievement of plastic electronics is constituted by Organic Light-Emitting Diodes (OLEDs) that equip the display of many smartphones, and even TV sets. The objective of this course is to provide a comprehensive overview of the physics of plastic electronic devices. After taking this course, the student should be able to demonstrate theoretical knowledge on the following subjects: Concept of organic semiconductors; Charge carrier transport in polymeric and organic semiconductors; Optical properties of organic semiconductors; Charge injection from metals to organic solids; Operating mode of the main plastic electronic devices: Organic light-emitting diodes (OLEDs), organic photovoltaic cells (OPVs) and organic field-effect transistors (OFETs).